37 kW Spindle Power
Heavy-duty spindle power designed for demanding commercial timber ripping applications.
The Tuckwell MR300 is a heavy-duty multi blade rip saw designed for fast, accurate and repeatable timber processing. Multiple blades allow wide timber boards to be ripped into several narrower pieces in a single pass, making the MR300 ideal for high-volume hardwood and softwood production.
The Tuckwell MR300 multi blade rip saw is built for timber processors, furniture manufacturers, pallet manufacturers, joinery workshops and other production environments where wide boards need to be ripped quickly and consistently.
A powerful 37 kW spindle motor, inverter-controlled feed from 4–30 m/min and multiple-blade configurations allow the MR300 to handle a wide range of production requirements. Depending on timber thickness and blade diameter, the machine can be configured with up to 15 saw blades.
Tuckwell Machinery supplies and supports the MR300 throughout Australia, with assistance available for machine selection, blade setup, installation, operator training, servicing and spare parts.
Instead of making repeated individual cuts, a multi rip saw uses multiple blades on the same spindle to process a board into several narrower sections during a single feed cycle.
Heavy-duty spindle power designed for demanding commercial timber ripping applications.
Configure multiple saw blades according to timber thickness, blade diameter and required finished widths.
Inverter-controlled feeding from 4–30 m/min allows production speed to be matched to the material and cutting configuration.
Processes material up to 300 mm wide and from 10–120 mm in working thickness.
The MR300 is designed for businesses where timber ripping is a repeated production process. By mounting several saw blades on the spindle, one wide board can be divided into multiple pieces as it travels through the machine.
This makes a multi blade rip saw particularly useful where consistent widths, repeatability and throughput are more important than repeatedly setting up individual rip cuts.
A multi rip saw is designed for production environments where the same type of ripping operation is performed repeatedly. Multiple blades reduce the number of individual passes required to produce several finished widths from one board.
For the right application, this can improve throughput and help maintain repeatable cutting dimensions across larger production runs.
Review the main working capacities, spindle specifications, feeding system and dust extraction requirements for the MR300.
| Specification | MR300 |
|---|---|
| Working thickness | 10–120 mm |
| Minimum working length | 600 mm single / 300 mm continuous |
| Maximum working width | 300 mm |
| Blade diameter | 205–380 mm |
| Blade bore diameter | 70 mm |
| Spindle diameter | 55 mm |
| Spindle speed | 4000 rpm |
| Spindle power | 37 kW |
| Feeding power | 2.2 kW |
| Feeding speed | 4–30 m/min, inverter controlled |
| Pressure roller lifting motor | 0.37 kW |
| Dust outlets | 2 × 150 mm |
| Required air volume | 3800 m³/h |
| Extraction air speed | 25–35 m/s |
| Table height | 740 mm |
| Table size | 1735 × 760 mm |
| Machine dimensions | 190 × 160 × 175 cm |
| Machine weight | 2300 kg |
Specification note: Machine capability depends on timber type, blade selection, cutting configuration and operating conditions. Confirm the final configuration with Tuckwell Machinery before ordering.
The number of blades that can be used depends on blade diameter, timber thickness, kerf and the required cutting configuration. The table below provides a reference based on the current MR300 information.
| Blade Diameter | Workpiece Thickness | Blade Quantity |
|---|---|---|
| 205–255 mm | 20–30 mm | Up to 15 blades |
| 205–255 mm | 30–40 mm | Up to 12 blades |
| 255–305 mm | 40–60 mm | Up to 8 blades |
| 255–305 mm | 60–80 mm | Up to 6 blades |
| 305–380 mm | 80–100 mm | Up to 5 blades |
| 305–380 mm | 100–120 mm | Up to 4 blades |
Final blade selection should be based on timber species, blade kerf, finished dimensions and production requirements. Tuckwell Machinery can assist with machine and blade setup.
The MR300 is designed for both hardwood and softwood processing, subject to correct blade selection and machine setup.
That makes it suitable for Australian businesses processing dense hardwood species as well as pine and other suitable production timber.
The best configuration depends on the timber being processed and the required finished product.
Tuckwell Machinery supplies specialist woodworking machinery to professional timber and manufacturing businesses throughout Australia, with support before and after installation.
Discuss timber type, required widths, throughput and your production requirements before selecting a machine.
Assistance with blade diameter, blade quantity and suitability for your timber-processing application.
Support with machine installation, commissioning and operator training.
Ongoing servicing, technical assistance and spare parts support for machinery supplied by Tuckwell.
Talk to Tuckwell Machinery about the MR300 multi blade rip saw, your timber type, required finished widths, production volume and dust extraction requirements.
Common questions about multi rip saw machines, blade configurations and the Tuckwell MR300.
A multi blade rip saw is used to divide a wide timber board into several narrower pieces during one feed cycle. It is designed for repeated production ripping where consistent widths and high throughput are required.
A conventional rip saw generally makes one rip cut at a time. A multi blade rip saw carries several blades on the spindle so multiple parallel rip cuts can be completed as the timber passes through the machine.
Depending on blade diameter, timber thickness and cutting configuration, the MR300 can be configured with up to 15 blades.
The MR300 has a working thickness range of approximately 10–120 mm.
The MR300 has a maximum listed working width of 300 mm.
The MR300 is designed for hardwood and softwood applications. Suitability for a specific timber species depends on blade selection, timber dimensions and machine setup.
Yes. The MR300 has two 150 mm dust outlets and requires suitable extraction. The listed required air volume is approximately 3800 m³/h.
Yes. Tuckwell Machinery supplies professional woodworking machinery throughout Australia and provides machine selection, installation, training, servicing and spare parts support.