Explore Elumatec aluminium saws for accurate profile cutting, including double mitre saws, single-head aluminium mitre saws and table saw options for window, door, façade and architectural aluminium fabrication.
Tuckwell Machinery supplies Elumatec aluminium saws for professional aluminium fabrication, from flexible single-head machines through to large-format double mitre saws for repeat production cutting.
Designed specifically for aluminium profile processing, the range supports window and door manufacturing, curtain wall and façade work, architectural aluminium and other applications where accurate lengths, repeatable angles and clean profile cutting matter. Tuckwell Machinery is the sole agent for Elumatec in Queensland, providing machinery advice, installation, training, servicing support and genuine parts.
Elumatec saws are engineered around aluminium profile processing rather than adapted from general woodworking or metal-cutting machinery. That gives fabricators machine configurations designed for profile support, controlled clamping, accurate angle adjustment and repeatable day-to-day production.
The right saw depends on the profiles you process, the cutting angles required, production volume and whether you need one or two saw heads working across the profile.
Double mitre saws cut both ends of an aluminium profile, making them well suited to production environments where repeatable length and angle accuracy are essential.
The DG79 is designed for production cutting of aluminium profiles. Both saw heads pivot continuously from 0° to 45° left and right with positive stops at 15°, 30° and 45°.
The DG104 is Elumatec’s universal double mitre saw for series production and specialist applications, with independently pivoting and tilting saw units for high, wide and compound mitre cutting.
The DG244 is a large-format double mitre saw for structural aluminium profiles. It uses Elumatec’s cutting-from-below principle and supports compound mitre work.
The MGS range gives aluminium fabricators single-head cutting flexibility across compact, universal and large-format profile work.
The MGS72 is a compact aluminium mitre saw with a stable support table, precision-bearing turntable and positive stops at commonly used cutting angles.
The MGS105 is Elumatec’s universal mitre saw for specialist applications, using the cutting-from-below principle with pivot and tilt adjustment for compound cutting.
The MGS245 is designed for structural and wide aluminium profiles, with pivot and tilt adjustment for larger profile cutting applications.
The TS161 uses Elumatec’s cutting-from-below principle for accurate 90° and angled profile cutting. It includes manual feed, pneumatic vertical clamping and a pulsed coolant system.
Use this overview to compare the key model differences. Final machine selection should also consider profile dimensions, required cutting angles, throughput and workshop layout.
| Model | Type | Blade | Speed | Power | Key Use |
|---|---|---|---|---|---|
| DG79 | Double mitre saw | 380 mm | 2,800 rpm | 3 kW per head | Production profile cutting |
| DG104 | Universal double mitre saw | 420 mm | 2,800 rpm | 4 kW per head | Series production & compound cutting |
| DG244 | Large-format double mitre saw | 550 mm | 2,250 rpm | 4 kW per head | Structural aluminium profiles |
| MGS72 | Single-head mitre saw | 380 mm | 2,800 rpm | 3 kW | Compact flexible profile cutting |
| MGS105 | Universal mitre saw | 420 mm | 2,800 rpm | 4 kW | Specialist & compound cutting |
| MGS245 | Large-format mitre saw | 550 mm | 2,250 rpm | 4 kW | Wide & structural profiles |
| TS161 | Table saw | 280 mm | 3,200 rpm | 1.05 kW | 90° & angled cross-cutting |
The right machine depends on the aluminium profiles you process and how your production line is set up. Tuckwell can help you compare Elumatec models around the work you actually do.
Tuckwell Machinery is the sole agent for Elumatec in Queensland and supports aluminium fabricators with machine selection, supply, installation, operator training, servicing and genuine parts.
Help comparing saw models and other Elumatec aluminium machinery around your production requirements.
Advice around profile sizes, cutting angles, production throughput and workshop layout.
Machine setup, commissioning and operator training for Elumatec machinery supplied by Tuckwell.
Technician-backed service assistance and access to genuine Elumatec parts for supported machines.
Tell us what profiles you cut, the angles you need and your production volume. We can help you compare the right Elumatec saw for your workshop.
Answers to common questions about double mitre saws, aluminium mitre saws, blade sizes and Elumatec support.
Tuckwell Machinery supplies Elumatec double mitre saws, single-head aluminium mitre saws and table saw options for aluminium profile cutting.
A double mitre saw uses two saw heads to cut both ends of an aluminium profile, making it well suited to repeat production. A single-head mitre saw provides flexible cutting where simultaneous two-end cutting is not required.
Yes. Elumatec saws are designed for aluminium profile processing, including window, door, curtain wall, façade and architectural aluminium applications.
The DG244 and MGS245 are the large-format options shown on this page, both using 550 mm saw blades for larger profile cutting applications.
The models shown on this page use 280 mm, 380 mm, 420 mm and 550 mm saw blades depending on the machine.
Yes. Tuckwell Machinery supports the Elumatec machinery it supplies with installation, operator training, servicing assistance and genuine parts support in Queensland.
Yes. Tuckwell Machinery is the sole agent for Elumatec in Queensland.
Explore complementary aluminium machinery for CNC processing, routing, crimping, measuring and finishing.
