Large Aluminium Profiles
The 550 mm saw blades provide substantial cutting capacity for aluminium profiles that exceed the working range of smaller saw models.
The Elumatec DG244 is built for demanding aluminium profile cutting where large cutting capacity, compound angles and flexible saw-head positioning are required. Its 550 mm saw blades, cutting-from-below design and universal pivoting and tilting saw units make it a highly capable machine for large, high and wide profiles.
The Elumatec DG244 is designed for aluminium fabrication applications that demand greater cutting capacity and angular flexibility. Both saw units can pivot and tilt, allowing the machine to process high and wide profiles as well as compound mitre cuts that may otherwise require additional support blocks or more complex setup.
Elumatec's cutting-from-below principle leaves the support table freely accessible, while external-dimension cutting at different angle positions reduces the need for manual length calculations when profile heights change. For workshops processing substantial aluminium sections or specialist profiles, these features make the DG244 a highly versatile production machine.
The DG244 is suited to fabrication environments where profile size, cutting angle and finished dimensions can vary considerably. Its large blade diameter and universal head movement give the machine the flexibility required for both repeat production and specialist aluminium cutting.
The 550 mm saw blades provide substantial cutting capacity for aluminium profiles that exceed the working range of smaller saw models.
Universal pivoting and tilting of both saw units allows many high and wide profiles to be processed without additional support blocks.
The saw heads can be positioned for compound cutting where both horizontal and vertical angle adjustment are required.
External-dimension cutting helps simplify production when cutting special angles or profiles with different heights.
The DG244 uses Elumatec's established cutting-from-below principle. The saw blades rise into the profile from beneath the support table, helping keep the work area accessible for profile positioning and handling.
Combining this layout with the large 550 mm saw blade diameter provides the DG244 with significant cutting capacity across a broad range of profile shapes and cutting angles.
The DG244 is defined by its large cutting capacity, highly adjustable saw heads and external-dimension cutting system rather than by a single standard production setup.
The large saw blade diameter is one of the DG244's key model-specific features and provides substantial capacity for demanding aluminium profile work.
Both saw units pivot and tilt, allowing the DG244 to handle special angles, compound cuts and profiles with challenging dimensions.
The DG244 cuts to external dimensions at different angle positions, simplifying work where profile heights change between cuts.
The DG244 saw units pivot inwards pneumatically from 90° to 45°. For specialist cutting, the heads can also be adjusted manually to 22.5° inwards and up to 140° outwards, with digital angle feedback to assist setup.
The saw units tilt inwards pneumatically from 90° to 45°. Intermediate tilt angles can be set manually using the digital read-out and turret stop, giving the operator greater control when producing compound cuts.
The DG244 is available in three cutting-length variants and with either positioning or PC-based control, allowing the machine configuration to be matched more closely to the workshop's production requirements.
Choose the DG244 bed length around the longest aluminium profiles and finished components normally processed in the workshop.
The DG244 is available with the E390 positioning control or E580 PC control, depending on the level of production management and software functionality required.
Key technical specifications for the DG244 are shown below. Cutting capacity for individual profiles should be checked against the Elumatec cutting diagram and the required cutting angle.
| Specification | Elumatec DG244 |
|---|---|
| Minimum Cutting Length at 90° | 375 mm |
| Minimum Cutting Length at 45° Tilt | 375 mm |
| Pivoting Range Inwards | 90° – 45° pneumatically |
| Extended Manual Pivot Range | To 22.5° inwards and up to 140° outwards with digital display |
| Tilting Range Inwards | 90° – 45° pneumatically |
| Intermediate Tilt Angles | Manually adjustable with digital read-out display and turret stop |
| Saw Blade Diameter | 550 mm |
| Saw Blade Speed | 2,250 rpm |
| Power Supply | 230/400 V, 3~, 50 Hz |
| Power Output | 4 kW per motor |
| Compressed Air Supply | 7 bar |
| Air Consumption per Cycle | 40 L without spraying / 64 L with spraying |
| Cutting Length Variants | 4,500 mm / 6,000 mm / 7,500 mm |
The DG244 can be configured with material handling, saw-feed, software, extraction and production options according to the profiles being processed and the way material moves through the workshop.
Tuckwell Machinery can help assess which options are appropriate for the intended application rather than adding equipment that does not contribute to the production workflow.
The DG244 is positioned around cutting capacity and flexibility. Its combination of 550 mm blades, wide angular movement and 7.5 m maximum cutting-length variant makes it particularly relevant where large or complex aluminium profiles form a regular part of production.
The 550 mm blades give the DG244 substantially more cutting capacity than smaller Elumatec saw models.
Wide pivot and tilt adjustment enables the DG244 to handle compound angles and specialist cutting requirements.
Control, software and material-handling options allow the machine to be configured around different production workflows.
See the DG244 operating and get a closer look at its saw-head movement, profile handling and cutting-from-below design.
If the DG244 is being considered for a specific aluminium profile range, Tuckwell Machinery can help review the profile dimensions, required angles, cutting lengths and production requirements before machine selection.
The DG244 is best assessed against the actual profiles and angles your workshop needs to process. Speak with Tuckwell before selecting the final configuration.
Tuckwell Machinery is an authorised Queensland dealer for Elumatec and supports the machinery we supply with practical advice, installation assistance, operator support, servicing and genuine parts.
Local access to Elumatec machinery, technical knowledge and product support through Tuckwell Machinery.
Practical advice based on the profiles being cut, required angles, machine configuration and workshop production requirements.
Assistance with delivery coordination, installation, machine setup and operator training for machinery supplied by Tuckwell.
Ongoing technical assistance, servicing support and access to genuine parts for Elumatec machinery.
Tell us what profiles you need to process, the required cutting angles and your production setup. We can help determine whether the DG244 and its available options are the right fit for your workshop.
Model-specific answers about DG244 cutting capacity, angles, controls and available configurations.
The DG244 is designed for aluminium profile cutting where large cutting capacity and flexible angle adjustment are required. Its 550 mm blades and universally pivoting and tilting saw units allow it to process high, wide and compound-cut profiles.
The DG244 uses 550 mm saw blades. The listed saw blade speed is 2,250 rpm, with 4 kW power output per motor.
The DG244 is available with 4,500 mm, 6,000 mm and 7,500 mm cutting lengths.
The listed minimum cutting length is 375 mm at 90° and 375 mm when tilted at 45°. An optional hydro-pneumatic saw-feed configuration is listed with a 400 mm minimum cutting length.
The saw units pivot inwards pneumatically from 90° to 45°. Manual adjustment is available to 22.5° inwards and up to 140° outwards with digital angle display.
Elumatec lists the E390 positioning control and E580 PC control for the DG244. Additional E580 software options include an optimisation program and modules for chop and oversize-length cuts.
Yes. The DG244 uses Elumatec's cutting-from-below principle, which leaves the support table accessible and allows the large saw blades to rise into the profile from beneath.
Yes. Tuckwell Machinery is an authorised Queensland Elumatec dealer and can assist with DG244 machine selection, configuration, installation support, operator guidance, servicing and genuine parts assistance.
Explore complementary machinery, aluminium processing equipment and workshop support from Tuckwell Machinery.